- UOA - Used Oil Analysis & Ferrography
- Acoustic Emission & Vibration Analysis
- CEMS - Continuous Emissions Monitoring
UK
+44 1903 731 470
Europe
+49 4121 700 890
North America
+1 713 255 7255
Asia
+60 3 2333 8906
India
+91 11 4158 6692
Home > On-Highway > Off-line Monitoring
Off-line On-Highway Monitoring Solutions
Kittiwake offers On-Site testing for numbers of useful inspections, however, well-run Off-Site, laboratory programs will likely trump the need for On-Site testing, unless you deem your particular operation can benefit. One thing that ON-SITE testing does, of course, is verify a sensor reading. One of the test parameters below, when ‘abnormal’ will probably be the cause of a sensor alarm, therefore, if you elect to utilize an Oil Condition sensor, a Tier 2 vetting system may make good economic sense.
Diesel, Powershift Transmission Oil Condition: Common important tests are available via Kittiwake Oil Test Centres (OTC), which can be configured in numerous ways, e.g.,
- Viscosity (VIS)
- Oxidation (OX)
- Water
- Insolubles/Fuel Soot (diesel only)
- Acid Number (AN)
- Base Number (BN)
Quick Contact
Gallery
Click images to enlarge
Heated Viscometer
Verify that the correct grade of fuel is delivered View
BN Electronic Test
Avoid fouling within the engine and corrosion of engine components View
AN Electronic Test
Provides an indication of oil oxidation View
Water in Oil Electronic Test
Essential to maintain and protect your equipment View
Approvals held within the Kittiwake Group
